Product Description
Description: Time Delay Relay • Delay on Break • Operating voltage: 230 VAC • Type: C/MOS digital circuitry • Range: 0.05-1.0 sec • Contact Configuration: SPDT Isolated • Contact Current: 20 A • Mounting : Base Mount • Termination: 1/4" Quick Connect • Adjustment: Remote Adjustment
| Product Information | | Resources |
| Manufacturer | Infitec | | Product Category | Time Delay Relay | | Product Sub Category | Delay on Break | | Series | KBKR Series |
| | |
Product Attribute
| Attribute Value
|
| Operating voltage | 230 VAC |
| Type | C/MOS digital circuitry |
| Range | 0.05-1.0 sec |
| Contact Configuration | SPDT Isolated |
| Contact Current | 20 A |
| Mounting | Base Mount |
| Termination | 1/4" Quick Connect |
| Adjustment | Remote Adjustment |
| Repeat Accuracy | ±0.5% Under Fixed Conditions |
| Setting Accuracy | ±10% |
| Reset Time | 50 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds |
| Time Delay vs. Voltage and Temperature | ±5% |
| Electrical Life | Full Load - 100,000 Operations |
| Mechanical Life | 10,000,000 Operations |
| Transient | ±1500 Volts for 150 Microseconds |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| KBKR Series |
| Series Description: Medium/High Power Timing Controls |
| Operation: Delay on Break: Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch, the output contacts transfer and remain transferred if no further action is taken. When the initiate switch is opened, the time delay begins. At the end of the pre-selected time delay the output contacts revert to their original unenergized position. Removal of input power will reset the control. |
- C/MOS Digital Circuitry
- Time Delays To 1000 Minutes
- No First Cycle Effect
- 0.5% Repeat Accuracy
- Wide Voltage Selection 24-230 VAC, 12-28 VDC
- Medium, High Power or Heavy Duty Output Ratings
- Outputs Available Isolated Or Non-Isolated
- No Heatsinking Required
- Encapsulated To Withstand Harshest Environments
- Seven Modes Of Operation
- UL / cUL Recognized
|
