Product Description
Description: Time Delay Relay • Re-Triggerable Single Shot • Operating voltage: 24 VAC/DC • Type: C/MOS digital circuitry • Range: From 0.05 seconds to 1000 minutes. • Contact Configuration: 1C SPDT • Contact Current: 10 Amp • Mounting : Plug-IN • Termination: Octal (8 Pin)
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Operating voltage | 24 VAC/DC |
| Type | C/MOS digital circuitry |
| Range | From 0.05 seconds to 1000 minutes. |
| Contact Configuration | 1C SPDT |
| Contact Current | 10 Amp |
| Mounting | Plug-IN |
| Termination | Octal (8 Pin) |
| Transient | ± 1500 volts for 150 microseconds |
| Polarity | DC units are reverse polarity protected |
| Dielectric breakdown | 1500 volts RMS minimum |
| Repeat accuracy | ± 0.5% under fixed conditions |
| Setting accuracy | ± 10% |
| Reset time | 100 milliseconds maximum, |
| Recycle time | 100 milliseconds during timing, 50 milliseconds after timing |
| Time delay vs. voltage and temperature: | ± 2% |
| Electrical Life | full load - 100,000 operations |
| Mechanical | 10,000,000 operations |
| Operating temperature | -20°C to +80°C |
| Storage temperature | -30°C to +85°C |
| Series Features |
| COR1205C (ES1187-A) |
| Series Description: Digital Plug-In Time Delay Relay |
| Mode of Operation: RETRIGGERABLE ONE-SHOT Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch (momentary or maintained) the output contacts transfer and the time delay begins, unless the unit is in 'Override Timing Mode'. At the completion of the pre-selected time delay the output contacts revert to their original position. NOTE: Reclosure of initiate switch during timing will reset the time delay. When unit is in 'Override Timing Mode' and has been initiated, the output will remain 'ON' indefinately. |
|