Product Description
Description: Time Delay Relay • Delay on Make • Input Voltage: 110 VDC • Time Delay Range: 3.0-100.0 min • Mounting : Octal Plug-in (8 Pin) • Adjustment: Knob • Contact Configuration: DPDT • Current: 10 Amp
| Product Information | | Resources |
| Manufacturer | Infitec | | Product Category | Time Delay Relay | | Product Sub Category | Delay on Make | | Series | CMR Series | | | |
| Product Attribute | Attribute Value |
| Input Voltage | 110 VDC |
| Time Delay Range | 3.0-100.0 min |
| Mounting | Octal Plug-in (8 Pin) |
| Adjustment | Knob |
| Contact Configuration | DPDT |
| Current | 10 Amp |
| Repeat Accuracy | ±5% Under Fixed Conditions |
| Setting Accuracy | ±10% |
| Reset Time | 100 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing
50 Milliseconds After Timing |
| Time Delay vs. Voltage and Temperature | ±2% |
| Electrical Life | Full Load: 100,000 Operations |
| Mechanical | 10,000,000 Operations |
| Transient | ±1500 Volts for 150 Microseconds |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| CMR Series |
| Series Description: Digital Plug-In Time Delay Relay |
Series Operation: Delay On Make
Upon application of power to the input terminals, the time delay begins. At the completion of the pre-selected time delay, the output contacts transfer. Reset is accomplished by removal of input power. There is no false output when reset during timing. |
- C/MOS Digital Circuitry
- Time Delays To 1000 Minutes
- No First Cycle Effect
- 0.5% Repeat Accuracy
- 2% Stability Over Voltage And Temperature
- Wide Voltage Selection 24-230 VAC, 12 - 110 VDC
- 8 Pin, 11 Pin, Stab/Square Base Plug-In Termination
|
RoHS Compliant