Product Description
Description: Time Delay Relay • Delay on Break • Input Voltage: 120 VAC • Time Delay Range: 1.0-60.0 sec • Mounting : 11 Pin Plug-in • Adjustment: Knob • Contact Configuration: DPDT • Current: 10 Amp
| Product Information |
|
Resources |
| Manufacturer |
Infitec |
| Product Category |
Time Delay Relay |
| Product Sub Category |
Delay on Break |
| Series |
CBR Series |
|
|
|
| Product Attribute |
Attribute Value |
| Input Voltage |
120 VAC |
| Time Delay Range |
1.0-60.0 sec |
| Mounting |
11 Pin Plug-in |
| Adjustment |
Knob |
| Contact Configuration |
DPDT |
| Current |
10 Amp |
| Repeat Accuracy |
±5% Under Fixed Conditions |
| Setting Accuracy |
±10% |
| Reset Time |
100 Milliseconds Maximum |
| Recycle Time |
100 Milliseconds During Timing
50 Milliseconds After Timing |
| Time Delay vs. Voltage and Temperature |
±2% |
| Electrical Life |
Full Load: 100,000 Operations |
| Mechanical |
10,000,000 Operations |
| Transient |
±1500 Volts for 150 Microseconds |
| Polarity |
DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown |
1500 Volts RMS Minimum |
| Operating Temperature |
-20°C to +80°C |
| Storage Temperature |
-30°C to +85°C |
| CBR Series |
| Series Description: Digital Plug-In Time Delay Relay |
Series Operation: Delay On Break
Power must be applied to th input at all times prior to and during timing. Upon closure of the initiate switch, the output contacts transfer and remain transferred if no further action is taken. When the initiate switch is opened, the time delay begins. At the end of the pre-selected delay period, the output contacts revert to their original position. Removal of input power will reset the control. |
- C/MOS Digital Circuitry
- Time Delays To 1000 Minutes
- No First Cycle Effect
- 0.5% Repeat Accuracy
- 2% Stability Over Voltage And Temperature
- Wide Voltage Selection 24-230 VAC, 12 - 110 VDC
- 8 Pin, 11 Pin, Stab/Square Base Plug-In Termination
|
RoHS Compliant