Product Description
Description: Time Delay Relay • Trailing Edge Triggered • Input Voltage: 230 VAC • Time Delay Range: 1-1023 sec • Mounting : 11 Pin Square • Contact Configuration: 2C DPDT • Current: 10 Amps
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 230 VAC |
| Time Delay Range | 1-1023 sec |
| Mounting | 11 Pin Square |
| Contact Configuration | 2C DPDT |
| Current | 10 Amps |
| Reset Time | 200 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing 200 Milliseconds After Timing |
| Initiate Time | 25 Milliseconds Maximum (Customizable Per Customer Request) |
| Electrical Life | Full Load - 100,000 Operations Mechanical - 10,000,000 Operations |
| Electrical Fast Transient Immunity | IEC 61000-4-4 |
| Surge Immunity | IEC 61000-4-5 |
| Dips, Shorts, and Interruptions Immunity | IEC 61000-4-11 |
| Polarity | D.C. Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative, Non-Condensing |
| Series Features |
| BTR Series |
| Series Description: Binary Digital Plug-In Time Delay Relay |
| Series Operation: TRAILING EDGE TRIGGERED Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch, nothing happens. When the initiate switch is opened, the time delay begins and the output contact transfers. At the completion of the pre-selected delay period the contact reverts to its original position. Removal of input power will reset the control. If the initiate switch is closed during timing, the output contact reverts to its original position and the time delay is reset. |
|