Product Description
Description: Time Delay Relay • Repeat Cycle / Recycle • Input Voltage: 230 VAC • Time Delay Range: 1-1023 sec • Mounting : Octal Plug-in (8 Pin) • Cycle: Off Time First • Contact Configuration: 2C DPDT • Current: 10 Amps
| Product Information | | Resources |
| Manufacturer | Infitec | | Product Category | Time Delay Relay | | Product Sub Category | Repeat Cycle / Recycle | | Series | BRSR Series |
| | |
Product Attribute
| Attribute Value
|
| Input Voltage | 230 VAC |
| Time Delay Range | 1-1023 sec |
| Mounting | Octal Plug-in (8 Pin) |
| Cycle | Off Time First |
| Contact Configuration | 2C DPDT |
| Current | 10 Amps |
| Reset Time | 200 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing 200 Milliseconds After Timing |
| Initiate Time | 25 Milliseconds Maximum (Customizable Per Customer Request) |
| Electrical Life | Full Load - 100,000 Operations Mechanical - 10,000,000 Operations |
| Electrical Fast Transient Immunity | IEC 61000-4-4 |
| Surge Immunity | IEC 61000-4-5 |
| Dips, Shorts, and Interruptions Immunity | IEC 61000-4-11 |
| Polarity | D.C. Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative, Non-Condensing |
| BRSR Series |
| Series Description: Binary Digital Plug-In Time Delay Relay |
Series Operation: ON/OFF RECYCLE BRSR Upon application of power to the input terminals, the ON delay begins and the output contacts transfer. Upon completion of the ON delay, the output contacts revert to their original position and the OFF delay begins. Upon completion of the OFF delay, the output contacts again tranfer and the cycle repeats. Reset is accomplished by removal of input power. |
- C/MOS Digital Circuitry
- 1% Setting Accuracy
- Eight Different Modes Of Operation
- No First Cycle Effect
- Wide Voltage Selection 24-230 VAC, 12 - 110 VDC
- LED Timing Indication
- 8 Pin, 11 Pin, Stab/Square Base Plug-in Termination
|