Product Description
Description: Time Delay Relay • Re-Triggerable Single Shot • Input Voltage: 230 VAC • Time Delay Range: .1-102.3 sec • Mounting : 11 Pin Plug-in • Contact Configuration: 2C DPDT • Current: 10 Amps
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 230 VAC |
| Time Delay Range | .1-102.3 sec |
| Mounting | 11 Pin Plug-in |
| Contact Configuration | 2C DPDT |
| Current | 10 Amps |
| Reset Time | 200 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing 200 Milliseconds After Timing |
| Initiate Time | 25 Milliseconds Maximum (Customizable Per Customer Request) |
| Electrical Life | Full Load - 100,000 Operations Mechanical - 10,000,000 Operations |
| Electrical Fast Transient Immunity | IEC 61000-4-4 |
| Surge Immunity | IEC 61000-4-5 |
| Dips, Shorts, and Interruptions Immunity | IEC 61000-4-11 |
| Polarity | D.C. Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative, Non-Condensing |
| Series Features |
| BOR Series |
| Series Description: Binary Digital Plug-In Time Delay Relay |
| Series Operation: RE-TRIGGERABLE ONE-SHOT Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch (momentary or maintained) the output contacts transfer and the time delay begins. At the comple- tion of the pre-selected time delay the output contacts revert to their original position. NOTE: Momentary or maintained closure of initiate switch during timing will reset the time delay. |
|