Product Description
Description: Time Delay Relay • Toggle / Single-Shot • Input Voltage: 24/28 VDC • Time Delay Range: .1-102.3 sec • Mounting : 11 Pin Plug-in • Contact Configuration: 2C DPDT • Current: 10 Amps
Product Information | | Resources |
Manufacturer | Infitec | Product Category | Time Delay Relay | Product Sub Category | Toggle / Single-Shot | Series | BFR Series |
| | |
Product Attribute
| Attribute Value
|
Input Voltage | 24/28 VDC |
Time Delay Range | .1-102.3 sec |
Mounting | 11 Pin Plug-in |
Contact Configuration | 2C DPDT |
Current | 10 Amps |
Reset Time | 200 Milliseconds Maximum |
Recycle Time | 100 Milliseconds During Timing 200 Milliseconds After Timing |
Initiate Time | 25 Milliseconds Maximum (Customizable Per Customer Request) |
Electrical Life | Full Load - 100,000 Operations Mechanical - 10,000,000 Operations |
Electrical Fast Transient Immunity | IEC 61000-4-4 |
Surge Immunity | IEC 61000-4-5 |
Dips, Shorts, and Interruptions Immunity | IEC 61000-4-11 |
Polarity | D.C. Units Are Reverse Polarity Protected |
Dielectric Breakdown | 1500 Volts RMS Minimum |
Operating Temperature | -20°C to +80°C |
Storage Temperature | -30°C to +85°C |
Humidity | 95% Relative, Non-Condensing |
BFR Series |
Series Description: Binary Digital Plug-In Time Delay Relay |
Series Operation: TOGGLE/SINGLE-SHOT Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch (momentary or maintained) the output contacts transfer and the time delay begins. Upon reclosure of the initiate switch or at the completion of the pre-selected delay period, the output contacts revert to their original position. The unit is now reset, ready for a new cycle |
- C/MOS Digital Circuitry
- 1% Setting Accuracy
- Eight Different Modes Of Operation
- No First Cycle Effect
- Wide Voltage Selection 24-230 VAC, 12 - 110 VDC
- LED Timing Indication
- 8 Pin, 11 Pin, Stab/Square Base Plug-in Termination
|