Product Description
Description: Time Delay Relay • Delay on Break • Input Voltage: 24/28 VDC • Time Delay Range: 10-10,230 sec • Mounting : 11 Pin Plug-in • Contact Configuration: 2C DPDT • Current: 10 Amps
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 24/28 VDC |
| Time Delay Range | 10-10,230 sec |
| Mounting | 11 Pin Plug-in |
| Contact Configuration | 2C DPDT |
| Current | 10 Amps |
| Reset Time | 200 Milliseconds Maximum |
| Recycle Time | 100 Milliseconds During Timing 200 Milliseconds After Timing |
| Initiate Time | 25 Milliseconds Maximum (Customizable Per Customer Request) |
| Electrical Life | Full Load - 100,000 Operations Mechanical - 10,000,000 Operations |
| Electrical Fast Transient Immunity | IEC 61000-4-4 |
| Surge Immunity | IEC 61000-4-5 |
| Dips, Shorts, and Interruptions Immunity | IEC 61000-4-11 |
| Polarity | D.C. Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative, Non-Condensing |
| Series Features |
| BBR Series |
| Series Description: Binary Digital Plug-In Time Delay Relay |
| Series Operation: DELAY ON BREAK BBR Power must be applied to the input at all times prior to and during tim- ing. Upon closure of the initiate switch the output contacts transfer and remain transferred if no further action is taken. When the initiate switch is opened, the time delay begins. At the end of the pre-selected delay period, the output contacts revert to their original position. Removal of input power will reset the control. |
|