Product Description
Description: Time Delay Relay • Delay on Break • Input Voltage: 24/28 VDC • Output Rating: High Power (Isolated) • Adjustment: Binary Dip Switch • Time Delay Range: 0.1 - 102.3 SECONDS • Mounting : Base Mount • Contact Configuration: 1C SPDT • Current: 20 Amps
| Product Information | | Resources |
| Manufacturer | Infitec | | Product Category | Time Delay Relay | | Product Sub Category | Delay on Break | | Series | BBKR Series |
| | |
Product Attribute
| Attribute Value
|
| Input Voltage | 24/28 VDC |
| Output Rating | High Power (Isolated) |
| Adjustment | Binary Dip Switch |
| Time Delay Range | 0.1 - 102.3 SECONDS |
| Mounting | Base Mount |
| Contact Configuration | 1C SPDT |
| Current | 20 Amps |
| Electrical Life | Full Load - 100,000
Mechanical - 1,000,000 Operations |
| Electrical Fast Transient Immunity | IEC 61000-4-4 |
| Surge Immunity | IEC 61000-4-5 |
| Dips, Shorts, and Interruptions Immunity | IEC 61000-4-11 4.4 Polarity |
| Polarity | DC Units Are Reverse Polarity Protected |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Mounting | One #8 or #10 Screw |
| Termination | 1/4" Quick Connect Terminals |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| BBKR Series |
| Series Description: Binary Digital Power Time Delay Relays |
| Series Operation: Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch, the output contacts transfer and remain transferred if no further action is taken. When the initi- ate switch is opened, the time delay begins. At the completion of the pre-selected delay period the output contacts revert to their original position. Closure of initiate during timing will reset the delay period. Removal of input power will reset the control |
- Microcontroller Circuitry
- Time Delays From 0.1 Seconds To 10,230 Minutes
- Eight Different Modes Of Operation
- 0.5% Repeat Accuracy
- Wide Voltage Selection 24-230 VAC, 12 - 24/28 VDC
- Encapsulated To Withstand Harshest Environments
- Contacts Rated Up To 30 Amps, 2 HP @ 240 VAC
|
RoHS Compliant