Product Description
Description: Electromechanical Totalizers • Input Voltage: 120 VAC • Adjustment: Binary Dip Switch (1 to 1023 Seconds) • Cancel Button: Yes • Mounting: Base Mount
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Adjustment | Binary Dip Switch (1 to 1023 Seconds) |
| Cancel Button | Yes |
| Mounting | Base Mount |
| Recycle time | 1 Second |
| Contact Configuration | 1A SPST, N.O. Non-Isolated |
| Current | 20 Amps |
| Electrical Life | Full Load - 100,000 Mechanical - 1,000,000 Operations |
| Minimum Switch Closure Time | 25 milliseconds |
| Minimum Switch Open Time (between closures) | 20 milliseconds minimum |
| Count Range | 1 to 15 switch closures |
| Count Adjustment | 4 position Binary DIP switch |
| Transient Protection | Movistor Protected to 10 Joules |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Mounting | End Mounting Ears #8 Screw Clearance (2 Places) |
| Termination | (6) #6 Screw Terminals |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| Series Features |
| ATCR Series |
| Series Description: Encapsulated Accumulating Timer |
| Series Operation: Power is applied to the unit at all times prior to and during timing. Coin switch closures are counted until their total equals the dip switch setting. At this point the output contact transfers and the time delay begins. For every coin switch closure counted, prior to or during timing, the unit adds the time set to the total vending time. When the remaining time is less than the set time, the last coin indicator output is energized. If additional coins are added, the last coin indicator output is de-energized until the remaining time is again less than the set time. Upon completion of the pre-selected time delay, the output contact reverts back to its original position and the control resets. Reset is also accomplished by removal of input power. |
|