Product Description
Description: Electromechanical Totalizers • Input Voltage: 230 VAC • Adjustment: Knob (1 to 5 Minutes) • Cancel Button: No • Mounting: Base Mount
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 230 VAC |
| Adjustment | Knob (1 to 5 Minutes) |
| Cancel Button | No |
| Mounting | Base Mount |
| Recycle time | 500 milliseconds |
| Contact Configuration | 1A SPST, N.O. Non-Isolated |
| Current | 20 Amps |
| Electrical Life | Full Load - 100,000 Mechanical - 1,000,000 Operations |
| Minimum Switch Closure Time | 25 milliseconds |
| Minimum Switch Open Time (between closures) | 20 milliseconds minimum |
| Count Range | 1 to 15 switch closures |
| Count Adjustment | 4 position Binary DIP switch |
| Transient Protection | Movistor Protected to 10 Joules |
| Dielectric Breakdown | 1500 Volts RMS Minimum |
| Mounting | End Mounting Ears #8 Screw Clearance (2 Places) |
| Termination | (6) #6 Screw Terminals |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -30°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| Series Features |
| ASCR Series |
| Series Description: Encapsulated Totalizer/Timer |
| Series Operation: Power is applied to the unit at all times prior to and during timing. Coin switch closures are counted until their total equals the dip switch setting. In addition, each time a coin switch closure is counted, the impulse counter output provides a pulse to increment an external impulse counter. At this point the output contact transfers and the time delay begins. Upon completion of the pre-selected time delay the output contact reverts to its original position and the control resets. Removal and re-application of input power will reset the control. |
|