Product Description
Description: Coin Vending Timers • Input Voltage: 120 VAC • Contact Configuration: 1A SPST-NO. Isolated • Current: 0.1 Amps • Mounting: Base Mount
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Contact Configuration | 1A SPST-NO. Isolated |
| Current | 0.1 Amps |
| Mounting | Base Mount |
| Contact Closure | 200 milliseconds ±20% |
| Isolation | (Input to Output) 1500 VAC minimum |
| Transient Protection | ±1500 volts for 150 microseconds |
| Dielectric Breakdown | 1500 volts RMS minimum |
| Minimum Switch Closure Time | 25 milliseconds |
| Minimum Switch Open Time (between closures) | 30 milliseconds minimum |
| Count Range | 1 to 15 switch closures |
| Count Adjustment | 4 position binary dip switch |
| Mounting Hardware | One #8 or #10 screw |
| Termination | 1/4" Quick Connect |
| Operating Temperature | -20°C to +80°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 95% Relative Non-Condensing |
| Series Features |
| AIS Series |
| Series Description: Single Accumulator Solid State Module |
| Series Operation: Input voltage is applied at all times. Coin switch closures are counted until their total equals the dip switch setting, causing the output to energize momentarily. The count is then reset to zero. NOTE: Unit will auto reset to new count setting without removing power. |
|