Product Description
Description: Switching Power Supply • Watts: 90W • Rated Voltage: 24 VDC • Rated Current: 3.75A • Material: Plastic • Input Voltage: 100 to 240V AC (Voltage range: 85 to 264VAC / 100 to 370V DC) • Mounting: DIN Rail or surface mount
| Product Information | | Resources |
| Manufacturer | Idec | | Product Category | Power Supplies | | Product Sub Category | Switching Power Supply | | Series | PS5R-V Series |
| | |
Product Attribute
| Attribute Value
|
| Watts | 90W |
| Rated Voltage | 24 VDC |
| Rated Current | 3.75A |
| Material | Plastic |
| Input Voltage | 100 to 240V AC (Voltage range: 85 to 264VAC / 100 to 370V DC) |
| Mounting | DIN Rail or surface mount |
| Frequency | 50/60 Hz |
| Input Current (Typ.) | 100VAC: 1.1A
230VAC: 0.6A |
| Inrush Current (cold start) | 100V AC: 18A, 230V AC: 45A |
| Leakage Current (at no load) | 120VAC: 0.5mA max. / 230VAC: 1.0mA max. |
| Typical Efficiency | 100VAC: 88% / 230VAC: 89% |
| Power Factor (Typ.) | 230 VAC: 0.86 |
| Adjustable Voltage Range | ±5% |
| Output Holding Time | 100VAC: 20ms / 230VAC: 30ms |
| Start Time (at rated input and output) | 800ms max. |
| Rise Time (at rated input and output) | 200ms max. |
| Input Fluctuation | 0.4% max. |
| Load Fluctuation | 1.0% max. |
| Temperature Change | 0.05%/°C max. (-10 to +50°C ) |
| Overvoltage Protection | 101% min. (auto reset) |
| Operation Indicator | LED (green) |
| Dielectric Strength | Between input and output terminals: 3,000V AC, 1 minute
Between input terminal and housing: 2,000V AC, 1 minute
Between output terminal and housing: 500V AC, 1 minute |
| Insulation Resistance | Between input and output terminals: 100M? min. (500V DC megger) Between input and ground terminals: 100M? min. (500V DC megger) |
| Operating Temperature | -25 to +65°C |
| Operating Humidity (no condensation) | 20 to 90% RH |
| Storage Temperature (No freezing) | -25 to +75°C |
| Storage Humidity (no condensation) | 20 to 90% RH |
| Vibration Resistance | 10 to 55Hz, amplitude 0.33mm, 2 hours each in 3 axes (when used with BNL6 end clips)
10 to 55Hz, amplitude 0.375mm, 2 hours each in 3 axes (when used with BNL8 end clips) |
| Shock Resistance | 300 m/s^(2) (30G), 3 times each in 6 directions |
| Expected Life | 8 years minimum (at the rated input, 50% load, operating temperature +40°C, standard mounting direction) |
| Dimensions (mm) (terminal part except | 95H × 36W × 108D |
| Weight (approx.) | 310g |
| Terminal screw (horizontal type) | M3.5 |
| PS5R-V Series Switching Power Supplies |
| Series Description: DIN-rail mount switching power supplies with global approvals for both industrial and hazardous locations |
- Compact size preserves panel space
- Slim size (width): 22.5mm (10W/15W/30W); 36mm (60W/90W); 46mm (120W); 60mm (240W)
- Universal Voltage Input: 85-264V AC/100-370V DC
- Wide operating temperature range
- Spring-up terminals accept ring & fork terminals
- Approved for use in Class I Division 2 hazardous locations
- Can be installed in 6 directions
- 10W ~ 90W meet NEC Class 2 output ratings
- Overcurrent protection with auto-reset
- Meets SEMI F47 Sag Immunity (208V AC input)
- RoHS compliant
- Five-year factory warranty
|
RoHS Compliant