Product Description
| This product has been Discontinued |
Description: Switching Power Supply • Watts: 30W • Rated Voltage: 24 VDC • Rated Current: 1.3A • Material: Plastic • Input Voltage: 85 to 264V AC, 105 to 370V DC • Mounting: DIN Rail or surface mount
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Watts | 30W |
| Rated Voltage | 24 VDC |
| Rated Current | 1.3A |
| Material | Plastic |
| Input Voltage | 85 to 264V AC, 105 to 370V DC |
| Mounting | DIN Rail or surface mount |
| Input Voltage (single-phase, 2-wire) | 100 to 240V AC nominal (85 to 264V AC), 50/60Hz (47 to 63Hz) 110 to 340V DC nominal (105 to 370V DC) |
| Input Current (typical) | 0.68A at 100V AC |
| Internal Fuse Rating | 3.15A |
| Inrush Current | 50A maximum (at cold start at 200V AC) |
| Leakage Current (at no load) | 0.75mA maximum (60Hz, measured in conformance with UL, CSA, VDE) |
| Typical Efficiency | 0.75 |
| Overvoltage Protection | Outputs turns off at 105% (typical) |
| Voltage Adjustments | ±10% (V.ADJ screw on top) |
| Output Holding Time | 20ms minimum (at full rated input and output) |
| Rise Time | 200ms maximum (at full rated input and output) |
| Line Regulation | 0.4% maximum |
| Load Regulation | 1.5% maximum |
| Fluctuation due to Ambient Temperature Change | 0.05% maximum |
| Ripple Voltage | 2% peak to peak maximum (including noise) |
| Overload Protection | 120% typical, auto reset |
| Operation Indicator | LED (green) |
| Parallel Operation Allowed | No |
| Dielectric Strength | Between input and output terminals: 3,000V AC, 1 minute Between input terminal and housing: 2,000V AC, 1 minute Between output terminal and housing: 500V AC, 1 minute |
| Insulation Resistance | Between input and output terminals/input terminals and housing: 100M? minimum (500V DC megger) |
| Operating temperature | 10 ? to +60 ?C (14 ? to 140 ?F) (see derating curves) |
| Operating humidity | 20 to 90% relative humidity (no condensation) |
| Storage temperature | 30 to +85°C (22 to +185°F) |
| Vibration resistance | 45m/s^(2), 10 to 55Hz, 2 hours on each of 3 axes |
| Shock resistance | 300m/s^(2) (30G), 3 shocks in each of 6 directions |
| Approvals | Conforms to EMC Directives EN50081-2 & EN50082-2. LVD Directive EN60529 Certified to EN60950. UL508 listed. UL, c-UL, TUV approved. CE marked. EN61000-3-2 |
| Dimensions (mm) (terminal part except | 75 x 90 x 95 |
| Weight (approx.) | 360g |
| Terminal screw (horizontal type) | Spring-up, fingersafe terminals with captive M3.5 screws |
| Series Features |
| PS5R Standard Series |
| Series Description: Switching Power Supplies |
|