Product Description
| This product has been Discontinued |
Description: Switching Power Supply • Watts: 30W • Rated Voltage: 5 VDC • Rated Current: 6 A • Material: Metal Frame • Input Voltage (Single-phase two-wire): 100 to 240V AC (Voltage range: 85 to 264V AC/105 to 370V DC)
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Watts | 30W |
| Rated Voltage | 5 VDC |
| Rated Current | 6 A |
| Material | Metal Frame |
| Input Voltage (Single-phase two-wire) | 100 to 240V AC (Voltage range: 85 to 264V AC/105 to 370V DC) |
| Frequency (AC input only) | 47 to 63Hz |
| Input Current (Typical) | 100V: 0.68A / 200V: 0.45A |
| Inrush Current (Cold start) | 100V: 20A max / 200V: 40A max |
| Leakage Current | 0.75 mA max. (60Hz; UL, CSA, VDE) |
| Power Factor (Typical) | - |
| Efficiency (Typical) | 5V DC: 75% / 12V DC: 77% / 24V DC: 79% |
| Rated Voltage/Current | 5V/6A; 12V/2.5A; 24V/1.3A |
| Adjustable Voltage Range | ±10% (V.ADJ control on front) |
| Output Holding Time | 20msec minimum (at the rated input and output) |
| Start Time | 200msec maximum (at the rated input and output) |
| Rise Time | 100msec maximum (at the rated input and output) |
| Input Fluctuation | 5V: 20mV maximum, 12V: 48mV maximum, 24V: 96mV maximum |
| Load Fluctuation | 5V: 40mV maximum, 12V: 100mV maximum, 24V: 150mV maximum |
| Temperature Change (10 to +50°C) | 5V: 60mV maximum / 12V: 150mV maximum / 24V: 290mV maximum |
| Ripple Voltage | 10 to 0°C: 5V: 160mV maximum, 12V/24V: 180mV maximum / 0 to +50°C: 5V: 120mV maximum, 12V/24V: 150mV maximum |
| Overcurrent Protection | 105% (Typical), Automatic reset |
| Over voltage Protection | Output off at 120%, reset when input voltage is restored |
| Operation Indicator | LED (green) |
| Dielectric Strength | Between input and output terminals: 3,000V AC, 1 minute Between input terminal and housing: 2,000V AC, 1 minute Between output terminal and housing: 500V AC, 1 minute |
| Insulation Resistance | Between input and output terminals: 100MW minimum (500V DC megger) Between input terminal and housing: 100MW minimum (500V DC megger) |
| Operating Temperature | 10? to +70°C |
| Storage Temperature | 30° to +75°C |
| Operating Humidity | 20 to 90% RH (no condensation, no freezing) |
| Vibration Resistance | 10 to 55Hz, 20m/s^(2) constant, sweep cycle 1 minute, 2 hours each in 3 axes |
| Shock Resistance | 200m/s^(2), 11ms, 1 shock each in 3 axes |
| Dimensions H X W X D (mm) | 96 x 35 x 114.5 |
| Weight (Approx.) | 340g |
| Terminal Screw | M4 slotted-Phillips head screw (screw terminal type) |
| Series Features |
| PS3L Series |
| Series Description: Metal Frame Switching Power Supplies |
|