Product Description
| This product has been Discontinued |
Description: Multi-function Analog Timers • Rated Voltage: 12 VDC • Time Range: 0.1 minutes to 10 hours • Output: - • Contact Configuration: 2C DPDT • Termination: Blade • Current: 10 A • Mode of Operation: OFF-delay/one-shot
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Mode of Operation | OFF-delay/one-shot |
| Rated Voltage | 12 VDC |
| Time Range | 0.1 minutes to 10 hours |
| Output | - |
| Contact Configuration | 2C DPDT |
| Termination | Blade |
| Current | 10 A |
| Pollution Degree | 2 (IEC60664-1) |
| Overvoltage Category | III (IEC60664-1) |
| Input off Voltage | Rated Voltage x10% minimum |
| Ambient Operating Temperature | -20 to +65ºC (without freezing) |
| Ambient Storage and Transport Temperature | -30 to +75ºC (without freezing) |
| Relative Humidity | 35 to 85%RH (without condensation) |
| Atmospheric Pressure | 80kPa to 110kPa (Operating), 70kPa to 110kPa (Transport) |
| Reset Time | 100msec maximum |
| Repeat Error | ±0.2%, ±20msec* |
| Voltage Error | ±0.2%, ±20msec* |
| Temperature Error | ±0.5%, ±20msec* |
| Setting Error | ±10% maximum |
| Insulation Resistance | 100M? minimum (500V DC) |
| Dielectric Strength | Between power and output terminals: 2000V AC, 1 minute Between contacts of different poles: 2000V AC, 1 minute Between contacts of the same pole:1000V AC, 1 minute |
| Vibration Resistance | 10 to 55Hz amplitude 0.5mm2 hours in each of 3 axes |
| Shock Resistance | Operating extremes: 98m/sec^(2) (10G) Damage limits: 490m/sec^(2) (50G) 3 times in each of 3 axes |
| Degree of Protection | IP40 (enclosure) (IEC60529) |
| Dimensions | RTE-P1, P2 40Hx 36W x 77.9D mm RTE-B1, B2 40Hx 36W x 74.9D mm |
| Weight (approx.) | RTE-P1: 87g / RTE-P2: 89g / RTE-B1, -B2: 85g |
| Series Features |
| RTE Multi-Function Timer |
| Series Description: The RTE series timers offer the most popular timing functions in 2 models (Power and Signal Triggered) together with high power 10A contacts. In fact, they use our famous RH2 relay, so you can be sure of the reliability. Powered Triggered Models offer standard ON Delay, Interval and Cycle ON & OFF timing functions, while Signal Triggered Models offer 6 distinct timing functions. Both are tubular pin base or .187 quick connect terminals. All models mount into industry standard sockets or standard 45mm square panel cutouts using an optional adaptor. |
|