Product Attribute
| Attribute Value
|
| Mode of Operation | ON-delay/interval |
| Rated Voltage | 120 VAC |
| Time Range | 0.1 minutes to 10 hours |
| Output | - |
| Contact Configuration | 2C DPDT |
| Termination | Blade |
| Current | 10 A |
| Pollution Degree | 2 (IEC60664-1) |
| Overvoltage Category | III (IEC60664-1) |
| Input off Voltage | Rated Voltage x10% minimum |
| Ambient Operating Temperature | -20 to +65ºC (without freezing) |
| Ambient Storage and Transport Temperature | -30 to +75ºC (without freezing) |
| Relative Humidity | 35 to 85%RH (without condensation) |
| Atmospheric Pressure | 80kPa to 110kPa (Operating), 70kPa to 110kPa (Transport) |
| Reset Time | 100msec maximum |
| Repeat Error | ±0.2%, ±20msec* |
| Voltage Error | ±0.2%, ±20msec* |
| Temperature Error | ±0.5%, ±20msec* |
| Setting Error | ±10% maximum |
| Insulation Resistance | 100M? minimum (500V DC) |
| Dielectric Strength | Between power and output terminals: 2000V AC, 1 minute
Between contacts of different poles: 2000V AC, 1 minute
Between contacts of the same pole:1000V AC, 1 minute |
| Vibration Resistance | 10 to 55Hz amplitude 0.5mm2 hours in each of 3 axes |
| Shock Resistance | Operating extremes: 98m/sec^(2) (10G)
Damage limits: 490m/sec^(2) (50G)
3 times in each of 3 axes |
| Degree of Protection | IP40 (enclosure) (IEC60529) |
| Dimensions | RTE-P1, P2 40Hx 36W x 77.9D mm
RTE-B1, B2 40Hx 36W x 74.9D mm |
| Weight (approx.) | RTE-P1: 87g / RTE-P2: 89g / RTE-B1, -B2: 85g |
RoHS Compliant