Product Description
Description: Multi-function Timers • Rated Voltage: 12V DC • Time Range: 1: 0.1sec - 6 hours • Output: 3A, 240V AC
5A, 120V AC/30V DC
(Resistive Load) • Contact Configuration: Delayed SPDT+Delayed SPDT • Termination: 11 pin • Operation System: Solid state CMOS Circuit • Mode of Operation: A: Sequential Start
B: On-delay with
course & fine
C: Recycler &
instaneous
D: Recycler out-puts (OFF Start)
E: Recycler outputs
(ON Start)
F: Interval ON
G: Interval ON
Delay
H: Sequential
Interval
| Product Information | | Resources |
| Manufacturer | Idec | | Product Category | Timer | | Product Sub Category | Multi-function Timers | | Series | GT3 Series |
| | |
Product Attribute
| Attribute Value
|
| Mode of Operation | A: Sequential Start
B: On-delay with
course & fine
C: Recycler &
instaneous
D: Recycler out-puts (OFF Start)
E: Recycler outputs
(ON Start)
F: Interval ON
G: Interval ON
Delay
H: Sequential
Interval |
| Rated Voltage | 12V DC |
| Time Range | 1: 0.1sec - 6 hours |
| Output | 3A, 240V AC
5A, 120V AC/30V DC
(Resistive Load) |
| Contact Configuration | Delayed SPDT+Delayed SPDT |
| Termination | 11 pin |
| Operation System | Solid state CMOS Circuit |
| Pollution Degree | 2 (IE60664-1) |
| Over voltage category | III (IE60664-1) |
| Voltage Tolerance | AF20: 85-264V AC(50/60Hz)
AD24: 20.4-26.4V AC(50/60Hz)/21.6-26.4V DC
D12: 10.8-13.2V DC |
| Disengaging value of Input
Voltage | Rated Voltage x10% minimum |
| Range of Ambient Operating
Temperature | -10 to +50ºC (without freezing) |
| Range of Ambient Storage and
Transport Temperature | -30 to +75ºC (without freezing) |
| Range of Relative Humidity | 35 to 85%RH (without condensation) |
| Atmospheric Pressure | 80kPa to 110kPa (Operating), 70kPa to 110kPa (Transport) |
| Reset Time | 60msec maximum |
| Repeat Error | ±0.2%, ±10msec* |
| Voltage Error | ±0.2%, ±10msec* |
| Temperature Error | ±0.6%, ±10msec* |
| Setting Error | ±10% maximum |
| Insulation Resistance | 100M? minimum (500V DC) |
| Dielectric Strength | Between power and output terminals: 2000V AC, 1 minute
Between contacts of different poles: 2000V AC, 1 minute
Between contacts of the same pole:750V AC, 1 minute |
| Vibration Resistance | 10 to 55Hz amplitude 0.75mm2 hours in each of 3 axes |
| Shock Resistance | Operating extremes: 98m/sec^{2} (approx.10G)
Damage limits: 490m/sec^{2} (approx. 50G)
3 times in each of 3 axes |
| Degree of Protection | IP40 (enclosure), IP20 (socket) (IEC60529) |
| Power
Consumption
(Approx.) | AF20: 100V AC/60Hz 2.3VA / 200V AC/60Hz 4.6VA, AD24 (AC/DC):.8VA/0.9W |
| Mounting Position | Free |
| Dimensions | 40Hx 36W x 70 mm |
| Weight (Approx.) | 72g |
| GT3W Series — DualTime RangeTimers |
| Series Description: The GT3W is a Multi function dual time range timer with 5A contact rating. Time ranges up to 300 hours. |
- Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions
- 2 time settings in one timer
- 8 selectable operation modes on each model
- Mountable in sockets or flush panel
- Power and output status indicating LEDs
- Time ranges up to 300 hours
|
RoHS Compliant