Product Description
| This product has been Discontinued |
Description: Power Relay • Coil Voltage: 6 VDC • Contact Configuration: 2C DPDT • Current: 10 Amps • Mounting: PC Board • Operating Function: 2 Coil Latching • Mounting: PC Board Pins • Contact Material: Silver cadmium oxide
| Product Information | | Resources |
| Manufacturer | Idec | | Product Category | Relays | | Product Sub Category | Power Relay | | Series | RH2L Series |
| | |
Product Attribute
| Attribute Value
|
| Coil Voltage | 6 VDC |
| Contact Configuration | 2C DPDT |
| Current | 10 Amps |
| Mounting | PC Board |
| Operating Function | 2 Coil Latching |
| Mounting | PC Board Pins |
| Contact Material | Silver cadmium oxide |
| Contact Resistance | 50m? or less (initial value) |
| Minimum Applicable Load | 5V DC, 100mA |
| Operating Time | 30ms (AC); 20 ms (DC) |
| Maximum Continuous
Applied Voltage (AC/DC) | 110% of rated voltage |
| Minimum Set and Reset
Voltage at 20°C | 80% of rated voltage |
| Set Time | 30ms or less (AC); 20ms or less (DC) |
| Reset Time | 30ms or less (AC); 20ms or less (DC) |
| Power Consumption | Set coil: AC: approximately 1.2V;
DC: approximately 2W
Reset coil: approximately 0.5VA;
DC: approximately 0.9W |
| Insulation Resistance | 100M? minimum |
| Dielectric Strength | Between live and dead parts:
2,000V AC, 1 minute
Between contact circuit and opposite
coil: 2,000V AC, 1 minute
Between contact circuits:
1,500V AC, 1 minute
Between contacts of same pole:
1,000V AC, 1 minute |
| Frequency Response | 1,800 operations/hour |
| Vibration Resistance | 60N (approximately 6G)
Maximum frequency 55Hz |
| Shock Resistance | 100N or more (approximately 10G) |
| Life Expectancy | Electrical: over 200,000 operations
Mechanical: over 10,000,000 operations |
| Operating Temperature | –30 to +70°C |
| Weight | 50g |
| RH2L Series |
| Series Description: Magnetic Latching Relays |
- Compact miniature size saves board space
- Power-saving operation by pulse inputs eliminates the need for continuous control voltage
- Coils rated for continuous duty
- Built-in mechanical indicator to show set/reset condition
- Available with blade and PC mount terminals
- DIN rail, surface, panel, and PCB type sockets available for a wide range of mounting applications
- Excellent self-holding performance (magnetic latching)
|
