Product Description
Description: Power Transformers • Type: Laminated Core • Voltage - Primary: 115V, 230V • Voltage - Secondary (Full Load): Parallel 10V, Series 20V • Current - Output (Max): Parallel 240mA, Series 120mA • Primary Winding(s): Dual • Secondary Winding(s): Dual • Center Tap: No • Power - Max: 2.5VA • Mounting Type: Through Hole • : PC Pin
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Type | Laminated Core |
| Voltage - Primary | 115V, 230V |
| Voltage - Secondary (Full Load) | Parallel 10V, Series 20V |
| Current - Output (Max) | Parallel 240mA, Series 120mA |
| Primary Winding(s) | Dual |
| Secondary Winding(s) | Dual |
| Center Tap | No |
| Power - Max | 2.5VA |
| Mounting Type | Through Hole |
| Termination Style | PC Pin |
| Size / Dimension | 41.28mm L x 36.50mm W |
| Height - Seated (Max) | 28.58mm |
| Voltage - Isolation | 4000Vrms |
| Weight | 0.17 lb (77.11 g) |
| Low Voltage PCB Mount - Universal - 2.5 VA to 56 VA 183 Series |
| Series Description: |
- Universal operation - dual primary. 115 or 230 VAC, 50/60 Hz current.
- 14 output voltages to choose from (5 - 36 VAC R.M.S.)
- Six VA size models available from - 2.5 to 56VA.
- Low profile, split bobbin with top shroud design.
- Dual winding secondaries, non-concentrically wound. Can be wired in series, parallel or used separately.
- Low primary to secondary coupling - no electrostatic shield required.
- High insulation - Hipot of 4,000V RMS.
- Class F insulation - 155 degrees C.
- Two hole mounting on 2.5, 5, 10 and 20VA sizes, four hole mounting on 30 and 56VA size (mounting screws not provided).
- P.C. board mount with industry standard pin spacing.
- Listings: cURus, CE and TUV.
- Note: Products produced after January 1st, 2021 will no longer have a TUV Label, however Hammond does carry plenty of TUV-labeled inventory.
|
RoHS Compliant