Product Description
Description: Power Transformers • Type: Laminated Core • Voltage - Primary: 115V • Voltage - Secondary (Full Load): Parallel 9V, Series 18V • Current - Output (Max): Parallel 60mA, Series 30mA • Primary Winding(s): Single • Secondary Winding(s): Single • Center Tap: Yes • Power - Max: 0.54VA • Mounting Type: Chassis Mount • : Wire Leads
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Type | Laminated Core |
| Voltage - Primary | 115V |
| Voltage - Secondary (Full Load) | Parallel 9V, Series 18V |
| Current - Output (Max) | Parallel 60mA, Series 30mA |
| Primary Winding(s) | Single |
| Secondary Winding(s) | Single |
| Center Tap | Yes |
| Power - Max | 0.54VA |
| Mounting Type | Chassis Mount |
| Termination Style | Wire Leads |
| Size / Dimension | 52.32mm L x 31.75mm W |
| Height - Seated (Max) | 30.26mm |
| Voltage - Isolation | 2000Vrms |
| Weight | 0.3 lb (136.08 g) |
| Low Voltage/Filament - Economical Single Primary - 0.63 VA to 288 VA 166 Series |
| Series Description: Open Style, Chassis Mount - 115 V Primary |
- Economical single primary 115 VAC, 60 Hz. (or 117 50/60 Hz. see table) - (If you require 117/234 or 50/60 Hz. operation or dual secondaries check out our versatile 266 Series.
- Most secondaries are center tapped (C.T.), VAC (RMS) - see table for details.
- Open style, channel bracket, two hole chassis mount.
- Minimum 6"" long leads.
- Dual bobbin design - no electrostatic shield required.
- We use Class B insulation (130 degrees, C) for extra protection - UL listed as a Class A (105 degree, C) design
- Hi-Pot test of 2,000V RMS.
- UL listed.
- CSA certified.
|
RoHS Compliant