Product Description
Description: Photo-electric Sensors • Sensing Method: Retroreflective • Sensing Distance: 3.150" (80mm) • Voltage - Supply: 10V ~ 30V • Response Time: 500µs • Output Configuration: NPN/PNP • Light Source: Red (660nm) • Connection Method: Cable • Ingress Protection: IEC 60529 IP65 • Cable Length: 78.74" (2m) • Adjustment Type: Adjustable
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Sensing Method | Retroreflective |
| Sensing Distance | 3.150" (80mm) |
| Voltage - Supply | 10V ~ 30V |
| Response Time | 500µs |
| Output Configuration | NPN/PNP |
| Light Source | Red (660nm) |
| Connection Method | Cable |
| Ingress Protection | IEC 60529 IP65 |
| Cable Length | 78.74" (2m) |
| Adjustment Type | Adjustable |
| Operating Temperature | 0°C ~ 60°C |
| Series Features |
| Photoelectrics, Fibre Optic Sensor Plastic Fibres Type PD 60 CNX 20 BP .. |
| Series Description: The PD60CNX20BP.. is a fibre optic amplifier made specific for plastic fibres. The sensor is microprocessor based and has a manual distance set-up by keyboard. NO or NC (light or dark mode) output are selectable by wiring. The sensor output is build as a Push- pull output that performs both a NPN and PNP output which are fully protected against short-circuit, transients and wrong polarity. The sensor is build in astrong 13x30x60 mm polycarbonate housing for DIN-rail mounting. The sensors are suitable for applications that require little space and high accuracy such as: Small part detection, tight locations, checking parts, counting, precise part positioning, material handling and assembly and robotics |
|