Product Description
Description: Photo-electric Sensors • Sensing Method: Retroreflective, Polarized • Sensing Distance: 196.850" (5m) • Voltage - Supply: 10V ~ 30V • Response Time: 500µs • Output Configuration: Push-Pull, NPN/PNP • Light Source: Red (620nm) • Connection Method: Connector, M8 • Ingress Protection: IP67 • Cable Length: - • Adjustment Type: Adjustable, Potentiometer
| Product Information | | Resources |
| Manufacturer | Carlo Gavazzi | | Product Category | Sensor | | Product Sub Category | Photo-electric Sensors | | Series | |
| | |
Product Attribute
| Attribute Value
|
| Sensing Method | Retroreflective, Polarized |
| Sensing Distance | 196.850" (5m) |
| Voltage - Supply | 10V ~ 30V |
| Response Time | 500µs |
| Output Configuration | Push-Pull, NPN/PNP |
| Light Source | Red (620nm) |
| Connection Method | Connector, M8 |
| Ingress Protection | IP67 |
| Cable Length | - |
| Adjustment Type | Adjustable, Potentiometer |
| Operating Temperature | -25°C ~ 60°C (TA) |
| PD30CTPS50BPxxIO - IO-Link Photoelectric Retro-reflective Polarized - PointSpot sensors with IO-Link communication |
Series Description: The PD30CTPS50BPxxIO are a part of the latest generation of high performance photoelectric sensors designed to solve most detection tasks due to the new IO-Link features.
The sensors are implemented in the compact 10 x 20 x 30 mm ABS housing that are acknoledged world wide.
New implemented functions with weight on functionality, reliability, Predictive maintenance make these sensors ideal for Industry 4.0. |
- Retro-reflective Polarized - PointSpot sensor with IO- Link with a adjustable distance of 2.5 to 5 m, either by trimmer or via IO-Link.
- Application functions: Pattern Recognition, Speed & Length, Divider function and Object & Gap Monitoring.
- Neighbour Immunity, selectable up to 3 sensors
- EasycustomizationtospecificOEMrequestsbyuseof the build in IO-Link functionalities.
- The output can be operated either as a standard switching output or in IO-Link mode.
- Fully configurable via output IO-Link v 1.1. Electrical outputs can be configured as PNP / NPN / Push-Pull / External input, normally open or normally closed.
- Timer functions can be set, such as ON-delay, Off- delay, and one shots.
- Logging functions: Temperatures, detecting counter, power cycles and operating hours.
- Detection modes Single point, two point and windows mode.
- Logic functions: AND, OR, XOR and Gated SR-FF.
- Analogue output: In IO-Link mode the sensor will generate 16 bit analogue process data output representing various selectable process data such as received signal level.
|
