Product Description
Description: Photo-electric Sensors • Sensing Method: Through-Beam • Sensing Distance: 15 m • Voltage - Supply: 10V ~ 30V • Response Time: OFF-ON 6.5 ms / ON-OFF 3.5 ms • Output Configuration: PNP, NO • Light Source: Infrared (890nm) • Connection Method: - • Ingress Protection: IP67 • Cable Length: - • Adjustment Type: -
| Product Information | | Resources |
| Manufacturer | Carlo Gavazzi | | Product Category | Sensor | | Product Sub Category | Photo-electric Sensors | | Series | |
| | |
Product Attribute
| Attribute Value
|
| Sensing Method | Through-Beam |
| Sensing Distance | 15 m |
| Voltage - Supply | 10V ~ 30V |
| Response Time | OFF-ON 6.5 ms / ON-OFF 3.5 ms |
| Output Configuration | PNP, NO |
| Light Source | Infrared (890nm) |
| Connection Method | - |
| Ingress Protection | IP67 |
| Cable Length | - |
| Adjustment Type | - |
| Operating Temperature | -20°C ~ 50°C |
| Photoelectrics Through-beam, Transistor Output Type PB18CNT15.. |
Series Description: The PB18CNT. is a through beam sensor set specific designed for safety edge sensing in industrial automatic doors.
The housing is designed to fit a ø18 mm rubber profile and has integreted sealing lips to prevent water from entering the profile.
The emitter has a mute input to turn it off for evaluation of the sensor function. Available in 10-30 VDC version. |
- Safety Edge sensor for doors
- Range 15 m
- ESPE, PSPE type 2, PL C
- Modulated, infrared light
- Supply voltage: 10 to 30 VDC
- Output: 100 mA, NPN or PNP type
- Make or break switching
- Protection: reverse polarity, short circuit, transients Cable versions with or without connector
- Emitter mute and power adjustment
- CE, UL325 and UL508 approved
|
