Product Description
Description: Time Delay Relay • Delay on Break • Operating Voltage: 115 VAC • Timing Ranges: 2-1000 sec • Mounting: Octal Plug-In • Output Current: 10 Amp • Contact Configuration: 1C SPDT • Adjustable: Adjustable
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Operating Voltage | 115 VAC |
| Timing Ranges | 2-1000 sec |
| Mounting | Octal Plug-In |
| Output Current | 10 Amp |
| Contact Configuration | 1C SPDT |
| Adjustable | Adjustable |
| Purchase Tolerance | Low time: +0%, -50%, High time: -0%, +50%. Ex: Timing range -3, (2 - 1000 seconds), can range from 1 to 1500 seconds, with 2 - 1000 seconds as a guaranteed minimum range. |
| Repeatability Of Timing Periods | ±2% |
| Timing/Temperature Coefficient | ±0.25%/˚C |
| Dielectric | 1,200V rms between open contact sets, 1,500V rms between contacts and operating voltage terminals. |
| Transient Protection | Protected by silicon transient suppressors responding to transients within 1x10-12 seconds to a peak pulse power dissipation of 1500 watts. |
| Operating Temperature | 0˚C to +70˚C |
| Series Features |
| 2710 Delay on Break Timer |
| Series Description: The 2710 is a DELAY-ON-BREAK timer controlling a SPDT set of relay contacts. The 2710 is available in a range of both AC and DC models. With operating voltage applied, the timer is in a stand-by mode. Closure of the INITIATE switch causes the output contacts to energize and remain energized until a preset timing period after the INITIATE switch opens. Re-closure of the INITIATE switch during timing resets the timer, keeping the output energized |