Product Description
Description: Delay on Make • Time Delay Relay • Input Voltage : 12 VDC • Timing Range: 0.1 sec - 1024 hr • Mounting : Octal Plug-In • Contact Configuration: 2C DPDT • Output Current: 12 Amps
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Operating Voltage | 12 VDC |
| Adjustable Timing Ranges | 0.1 - 102.4 seconds, 1 - 1024 seconds, 1 - 1024 minutes, 1 - 1024 hours. |
| Contact Configuration | DPDT |
| Terminations | Octal plug-in type. |
| Purchase Tolerance | ±2% |
| Repeatability Of Timing Periods | Better than ±2% |
| TimingTemperature Coefficient | Better than ±0.1% °C |
| Output Relay | DPDT contacts - 12A at 125V AC UL E88991 & CSA LR90143, 10A 125V AC TUV R9452021. |
| Dielectric Strength | 750V rms between open contact sets, 1,500V rms between contacts and operating voltage terminals. |
| Transient Protection | Protected by silicon transient suppressors responding to transients within 1x10-12 seconds to a peak pulse power dissipation of 1500 watts. |
| Operating Temperature | -20°C to 65°C |
| Series Features |
| 2410SA DIP Switch Adjustable Delay-On-Make Timer |
| Series Description: The 2410SA is a delay-on-make timer controlling a DPDT set of relay contacts. The 2410SA is available in both AC and DC voltage models, and all models provide an integral 12 position DIP switch used to determine the time delay value. With the operating voltage applied the unit starts timing, at the end of the time delay the output relay is energized. Remove the operating voltage to reset the output and time delay. DIP switches 11 & 12 determine the time delay range, while switches 1 - 10 determine the time delay period. The integral LED indicates the state of the output contacts. |