Product Description
Description: Time Delay Relays • Single Shot • Input Voltage: 24 VDC • Contact Configuration: 2C DPDT • Timing: Adjustable • Time Range: 0.1 sec - 60 sec • Termination: 11-pin spade terminals • Current: 10 Amp
| Product Information | Resources |
|
|
| This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement |
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 24 VDC |
| Contact Configuration | 2C DPDT |
| Timing | Adjustable |
| Time Range | 0.1 sec - 60 sec |
| Termination | 11-pin spade terminals |
| Current | 10 Amp |
| Temperature Range: Operating and storage: | Storage: -60°C to +105°C (-76°F to +221°F) Operating: -45°C to +70°C (-49°F to +158°F) |
| Enclosure | Black plastic case. Knob adjustable models have a dial scale for reference only |
| Weight | 4oz (114g) approx. |
| Timing Adjustment | Knob adjustable potentiometer. |
| Timing Tolerance | Fixed Units: ±5% |
| Adjustable Units | -0 to +25% of maximum specified delay time. Minimum specified value or less at low end. |
| Repeatability | ±5% |
| Release Time | 60 ms typical, 100 ms maximum. |
| Initial Dielectric Strength | Between open contacts: 1000V RMS, Between adjacent contacts: 1500V RMS, Between contacts & coil: 1500V RMS |
| Power Requirement | AC units: 3 VA or less; DC units: 2 Watts or less |
| Transient Protection | 1 JOULE MOV |
| Polarity Protection | On DC units - Yes. |
| Series Features |
| CIR Series TDR |
| Operation: Input voltage must be applied continuously to operate the internal relay. The relay energizes and timing begins when the external switch is closed. At the end of the time delay period the relay will de-energize. Reset is accomplished by opening and re-closing the control switch. |
|