This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement
Specifications
Product Attribute
Attribute Value
Input Voltage
24 VAC
Contact Configuration
2C DPDT
Timing
Fixed
Time Range
10 Sec
Termination
8-pin octal
Current
10 Amp
Temperature Range: Operating and storage:
Storage: -60°C to +105°C (-76°F to +221°F)
Operating: -45°C to +70°C (-49°F to +158°F)
Enclosure
White plastic case. Knob adjustable models have a dial scale for reference only.
Weight
4 oz (114g) approx.
Timing Adjustment
Knob adjustable potentiometer.
Timing Tolerance
Fixed Units: ±5%; 1% units are available at extra cost.
Adjustable Units
-0 to +10% of maximum specified delay time.
Repeatability
±1%
Release Time
60 ms typical, 100 ms maximum.
Timing Cycle Interrupt Transfer
None
Reset
Upon interruption of power
Initial Dielectric Strength
Between open contacts: 1000V RMS, Between adjacent contacts: 1500V RMS, Between contacts & coil: 1500V RMS
Power Requirement
AC units: 3 VA or less; DC units: 3 Watts or less
Transient Protection
1 JOULE MOV
Polarity Protection
On DC units - Yes.
Series Features
DC10 Series TDR
Operation:Delay on operate timing cycle begins upon application of input power. The relay contacts transfer at the end of the delay period and will remain transferred until input voltage is removed. Reset occurs when input voltage is removed.
Solid state CMOS digital circuitry
Triggered delay on release timing mode
DPDT (2 form C) isolated 10 ampere relay contacts
Timing selection: Knob adjustable or Fixed
Numerous models timing from 0.1 secs. to 1000 hours
