Product Description
Description: Time Delay Relays • Delay on Break • Input Voltage: 12 VDC • Contact Configuration: 2C DPDT • Reset : Trigger Reset Function • Timing: Adjustable • Time Range: 1 sec - 10 sec • Termination: 11-pin round • Current: 10 Amp
| Product Information | Resources |
|
|
| This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement |
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 12 VDC |
| Contact Configuration | 2C DPDT |
| Reset | Trigger Reset Function |
| Timing | Adjustable |
| Time Range | 1 sec - 10 sec |
| Termination | 11-pin round |
| Current | 10 Amp |
| Temperature Range: Operating and storage: | -60°C to +105°C (-76°F to +221°F) Operating: -45°C to +70°C (-49°F to +158°F) |
| Enclosure | Black plastic case. Knob adjustable models have a dial scale for reference only |
| Weight | 4 oz (114g) approx. |
| Timing Adjustment | Knob adjustable potentiometer. |
| Timing Tolerance | Fixed Units: ±5% |
| Adjustable Units | -0 to +25% of maximum specified delay time. Minimum specified value or less at low end. |
| Repeatability | ±5% |
| Release Time | 60 ms typical, 100 ms maximum. |
| Initial Dielectric Strength | Between open contacts: 1000V RMS Between adjacent contacts: 1500V RMS Between contacts & coil: 1500V RMS |
| Power Requirement | AC units: 3 VA or less; DC units: 3 Watts or less |
| Transient Protection | 1 JOULE MOV |
| Polarity Protection | On DC units - Yes. |
| Series Features |
| CR10 Series TDR |
| Operation: Input voltage must be applied continuously to operate the internal relay. Relay contacts transfer when the trigger input terminal is activated. The timing cycle begins when the trigger input terminal is deactivated. When the timing cycle is completed the relay will de-energize. The timing cycle may be reset to zero during the timing cycle by reactivating the trigger input terminal. |
|