This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement
Specifications
Product Attribute
Attribute Value
Input Voltage
12 VAC
Contact Configuration
2C DPDT
Reset
Trigger Reset Function
Timing
Fixed
Time Range
20 sec
Termination
11-pin round
Current
10 Amp
Temperature Range: Operating and storage:
-60°C to +105°C (-76°F to +221°F)
Operating: -45°C to +70°C (-49°F to +158°F)
Enclosure
Black plastic case. Knob adjustable models have a dial scale for reference only
Weight
4 oz (114g) approx.
Timing Adjustment
Knob adjustable potentiometer.
Timing Tolerance
Fixed Units: ±5%
Adjustable Units
-0 to +25% of maximum specified delay time. Minimum specified value or less at low end.
Repeatability
±5%
Release Time
60 ms typical, 100 ms maximum.
Initial Dielectric Strength
Between open contacts: 1000V RMS
Between adjacent contacts: 1500V RMS
Between contacts & coil: 1500V RMS
Power Requirement
AC units: 3 VA or less; DC units: 3 Watts or less
Transient Protection
1 JOULE MOV
Polarity Protection
On DC units - Yes.
Series Features
CR10 Series TDR
Operation:Input voltage must be applied continuously to operate the internal relay. Relay contacts transfer when the trigger input terminal is activated. The timing cycle begins when the trigger input terminal is deactivated. When the timing cycle is completed the relay will de-energize. The timing cycle may be reset to zero during the timing cycle by reactivating the trigger input terminal.
