This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement
Specifications
Product Attribute
Attribute Value
Input Voltage
120 VAC
Contact Configuration
2C DPDT
Timing
Adjustable
Time Range
.25 sec - 160 hr
Termination
8-pin octal
Current
10 Amp
Contact Material
Silver - Cadmium Oxide
Expected Life @ 25°C
10 Million operations, Mechanical ; 100,000 operations minimum at rated loads.
Temperature Range
Storage: -60°C to +105°C (-76°F to +221°F) Operating: -45°C to +70°C (-49°F to +158°F)
Enclosure
White plastic case with a dial scale for reference only. LSWPDC version has a black case.
Timing Adjustment
5 position binary Dip Switch coded as follows:
Repeatability
±1%
Release Time
60 ms typical, 100 ms maximum
Timing Cycle Interrupt Transfer
none
Reset
Upon interruption of power
Initial Dielectric Strength
Between open contacts: 1000V RMS, Between adjacent contacts: 1500V RMS, Between contacts & coil: 1500V RMS
Power Requirement
AC inputs: 3 VA or less, DC inputs: 3 Watts of less
Transient Protection
1 JOULE MOV
Polarity Protection
On DC inputs - Yes
Series Features
SWPDC Series TDR
Operation:Delay on operate timing cycle begins upon application of input power. The relay contacts transfer at the end of the delay period and will remain transferred until input voltage is removed. Reset occurs when input voltage is removed.
Solid state CMOS digital circuitry
Delay on operate timing mode
DPDT (2 form C) isolated 10 ampere relay contacts
Timing selection: 5 position binary coded Dip Switch plus vernier knob adjustment
Twenty overlapping timing ranges covering .25 secs. to 160 hours.
