Product Description
Description: Time Delay Relays • Delay on Make • Input Voltage: 120 VAC • Contact Configuration: 2C DPDT • Timing: Adjustable • Time Range: 10 sec - 10230 sec • Termination: 8-pin octal • Current: 10 Amp
| Product Information | Resources |
|
|
| This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement |
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 120 VAC |
| Contact Configuration | 2C DPDT |
| Timing | Adjustable |
| Time Range | 10 sec - 10230 sec |
| Termination | 8-pin octal |
| Current | 10 Amp |
| Contact Material | Silver - Cadmium Oxide |
| Expected Life @ 25°C | 10 Million operations, Mechanical ; 100,000 operations minimum at rated loads. |
| Temperature Range | Storage: -60°C to +105°C (-76°F to +221°F) Operating: -40°C to +65°C (-49°F to +149°F) |
| Timing Adjustment | User operated 10 position DIP switch encoded in binary format. |
| Adjustment Resolution | Equal to minimum time delay. |
| Timing Tolerance | +/- 2% |
| Timing Repeatability | +/-1% |
| Timing Cycle Interrupt Transfer | None |
| Reset | Upon interruption of input power |
| Initial Dielectric Strength | Between open contacts: 1000V RMS, Between adjacent contacts: 1500V RMS, Between contacts & coil: 1500V RMS. |
| Transient Protection | 1 JOULE MOV |
| Polarity Protection | On DC units - Yes |
| Series Features |
| SWDC Series Delay-On- MakeTimers |
| Operation: Delay on operate timing cycle begins upon application of input power. The relay contacts transfer at the end of the delay period and will remain transferred until input voltage is removed. Reset occurs when input voltage is removed |
|