Product Description
| This product has been Discontinued. |
Description: Time Delay Relays • Delay on Make • Input Voltage: 115 VAC/VDC • Timing Range: 240 sec • Mounting: Base Mount • Contact Configuration: 1A SPST-NO • Output Current : 3 A
| Product Information | Resources |
|
|
| This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement |
| Specifications |
| Product Attribute | Attribute Value |
| Input Voltage | 115 VAC/VDC |
| Timing Range | 240 sec |
| Mounting | Base Mount |
| Contact Configuration | 1A SPST-NO |
| Output Current | 3 A |
| Transient Protection | impervious to transients |
| Polarity Protection | None required |
| Contact Material | Silver - Cadmium Oxide |
| Expected Life @ 25° C | 500,000 operations minimum at rated loads |
| Temperature Range: Operating & storage | -34° C to +77° C, (-30° F to +171° F) |
| Termination | .110 inch (standard), .250 inch or screw terminals (optional). |
| Enclosure | Black plastic case. |
| Timing | Fixed: 2 through 300 secs. |
| Timing Tolerance | ±20% - Tighter tolerances are available. |
| Repeatability | ±5% |
| Release Time | Fixed: Varies with initial delay - contact factory |
| Timing Cycle Interrupt Transfer | none |
| Initial Dielectric Strength | Between open contacts: 500V RMS Between contacts & Coil: 500V RMS |
| Power Requirement | 2.3 Watts |
| Series Features |
| B Series TDR |
| Operation: Timing cycle begins upon application of power to the heater terminals. At the end of the initial delay time the relay contacts transfer and remain in a transferred state until input power is removed. When the heater input power is removed, the contacts transfer back to their original state at the end of a reset (release) delay period. |
|