This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement
Specifications
Product Attribute
Attribute Value
Input Voltage
115 VAC/VDC
Timing Range
10 sec
Mounting
Base Mount
Contact Configuration
1A SPST-NO
Output Current
3 A
Transient Protection
impervious to transients
Polarity Protection
None required
Contact Material
Silver - Cadmium Oxide
Expected Life @ 25° C
500,000 operations minimum at rated loads
Temperature Range: Operating & storage
-34° C to +77° C, (-30° F to +171° F)
Termination
.110 inch (standard), .250 inch or screw terminals (optional).
Enclosure
Black plastic case.
Timing
Fixed: 2 through 300 secs.
Timing Tolerance
±20% - Tighter tolerances are available.
Repeatability
±5%
Release Time
Fixed: Varies with initial delay - contact factory
Timing Cycle Interrupt Transfer
none
Initial Dielectric Strength
Between open contacts: 500V RMS Between contacts & Coil: 500V RMS
Power Requirement
2.3 Watts
Series Features
B Series TDR
Operation:Timing cycle begins upon application of power to the heater terminals. At the end of the initial delay time the relay contacts transfer and remain in a transferred state until input power is removed. When the heater input power is removed, the contacts transfer back to their original state at the end of a reset (release) delay period.
