This product is Unavailable - the factory shut down on June 2023. Please Contact Customer Service for help with Cross Reference / Replacement
Specifications
Product Attribute
Attribute Value
Input Voltage
115 VAC
Contact Configuration
1A SPST-NO
Reset
Trigger Reset Function
Timing
Fixed
Time Range
1 sec
Termination
screw terminals
Current
1 Amp
Temperature Range: Operating and storage:
Operating and storage: -25°C to +60°C, (-13°F to +140°F)
Enclosure
Black plastic case
Weight
0.8 oz (23g) approx.
Timing Adjustment
Knob adjustable potentiometer.
Timing Tolerance
Fixed Units: ±5%
Adjustable Units
-0 to +25% of maximum specified delay time. Minimum specified value or less at low end.
Repeatability
±5%
Release Time
60 ms typical, 100 ms maximum.
Initial Dielectric Strength
Between open contacts: 500V RMS, Between contacts & coil: 500V RMS
Power Requirement
AC units: 2 VA or less; DC units: 2 Watts or less
Polarity Protection
On DC units - Yes.
Series Features
CR Series TDR
Operation:Input voltage must be applied continuously to operate the internal relay. Relay contacts transfer when the trigger input terminal is activated. The timing cycle begins when the trigger input terminal is deactivated. When the timing cycle is completed the relay will de-energize. The timing cycle may be reset to zero during the timing cycle by reactivating the trigger input terminal.
