Get A Quote
My Account
To ensure accuracy, please note that images may be representative. Refer to the product data sheet for detailed specifications.
| Manufacturer | Amperite |
| Manufacturer Product Number | HEAD-ALERT 2 |
| Description | Solid State Flasher; 200 to 280 cycles per minute |
| Datasheet | Download Datasheet |
The Amperite HEAD-ALERT 2 is a solid state flasher rated 120 W incandescent, driven by a 11 to 16 V (standard automotive range); negative-ground systems only input.
It suits incandescent headlamp (high or low beam).
It has Three wire leads about 12 in long; photocell cable 18 in terminals.
| Category | |
| Manufacturer | Amperite |
| Part Status | Discontinued |
| Flash Rate | 200 to 280 cycles per minute |
| ON/OFF Ratio | Maximum power for 50 to 70% of each cycle; low portion not less than 17% of maximum power |
| Input Voltage | 11 to 16 V (standard automotive range); negative-ground systems only |
| Output Technology | Solid state switching transistor |
| Load Type | Incandescent headlamp (high or low beam) |
| Output Rating | 120 W incandescent |
| Connection | Three wire, in series with the +12 V headlamp feed (red = switch feed, green = to bulb, black = chassis ground); reverse polarity will destroy the module |
| Termination Style | Three wire leads about 12 in long; photocell cable 18 in |
| Enclosure | Black plastic, epoxy sealed |
| Dimensions | 2-1/8 x 1-1/2 x 3/4 in |
| Operating Temperature (°C) | -40...+60 |