Get A Quote
My Account
To ensure accuracy, please note that images may be representative. Refer to the product data sheet for detailed specifications.
| Manufacturer | Amperite |
| Manufacturer Product Number | 12F110HDFW |
| Description | Alternating Flasher; 110 FPM; 12 V; Lamps (incandescent) |
| Datasheet | Download Datasheet |
The Amperite 12F110HDFW is an alternating flasher with 2 SPST normally open (2 form A) output and rated 15 A resistive each output contact; 200 W maximum incandescent lamp load each side, driven by a 12 V input.
It suits lamps (incandescent).
It has Two screw mounting wings mounting and #14 gauge flexible wire leads, approx. 18 in (Red +12 V, Black ground/switch, Blue loads, Orange headlamp switch) terminals.
| Category | |
| Manufacturer | Amperite |
| Flash Rate | 110 FPM |
| Flash Rate Tolerance | ±10% |
| Flash Rate Adjustment | Fixed |
| Flash Sequence | Alternating (load #1 / load #2) |
| ON/OFF Ratio | 50% duty cycle; custom duty cycles available |
| Custom Flash Rates | 10 - 120 FPM |
| Input Voltage | 12 V |
| Input Operating Range | 10.5 to 16 V DC |
| Rated Power | 2 W or less |
| Output Technology | Electromechanical relays (two automotive relays) driven by transistors |
| Contact Configuration | 2 SPST normally open (2 form A) |
| Load Type | Lamps (incandescent) |
| Output Rating | 15 A resistive each output contact; 200 W maximum incandescent lamp load each side |
| Connection | 5 terminal or 5 wire lead |
| Mounting Type | Two screw mounting wings |
| Termination Style | #14 gauge flexible wire leads, approx. 18 in (Red +12 V, Black ground/switch, Blue loads, Orange headlamp switch) |
| Enclosure | Black plastic case, epoxy encapsulated |
| Dimensions | 2 x 2 x 1-1/2 in (outline drawing) |