Get A Quote
My Account
To ensure accuracy, please note that images may be representative. Refer to the product data sheet for detailed specifications.
| Manufacturer | Amperite |
| Manufacturer Product Number | 12DF45DFWS |
| Description | Alternating Flasher; 45 FPM; 12 V DC; 10 A; Quick Connect - 0.250" (6.3mm) |
| Datasheet | Download Datasheet |
The Amperite 12DF45DFWS is an alternating flasher rated 10 A RMS, driven by a 12 V DC input.
It suits incandescent and inductive loads.
It has Two Hole (heat sink needed at full load) mounting and 0.250" (6.3mm) quick-connect terminals.
| Category | |
| Manufacturer | Amperite |
| Part Status | Discontinued |
| Flash Rate | 45 FPM |
| Flash Rate Adjustment | Fixed |
| Flash Sequence | Alternating (output #1 / output #2) |
| ON/OFF Ratio | 50% duty cycle; other duty cycles available |
| Custom Flash Rates | 1 to 1000 FPM |
| Input Voltage | 12 V DC |
| Input Operating Range | ±10% of nominal |
| Output Technology | Solid state switching device; zero AC voltage switching |
| Load Type | Incandescent and inductive loads |
| Load Current (A) | 10 |
| Output Rating | 10 A RMS |
| Maximum Peak Current (A) | Inrush 10 times steady state value |
| Mounting Type | Two Hole (heat sink needed at full load) |
| Termination Style | Quick Connect - 0.250" (6.3mm) |
| Enclosure | Black plastic case, epoxy sealed |
| Dimensions | 2 x 3 x 1-1/2 in (text); drawing shows 3-1/2 in over mounting ears |
| Operating Temperature | -23...+60 °C (-23...+60 °C) |
| Approvals | UL File pending, CSA File pending |