Create or
Sign In to your RSI account for more Information and Special Offers!
To ensure accuracy, please note that images may be representative. Refer to the product data sheet for detailed specifications.
Product Description
Description: Signal Relay • Coil Voltage: 9 VDC • Contact Configuration: 2C DPDT • Current: 2 Amps • Mounting: SMT(Short Leg) • Operating Function: Single Side Stable
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Coil Voltage | 9 VDC |
| Contact Configuration | 2C DPDT |
| Current | 2 Amps |
| Mounting | SMT(Short Leg) |
| Operating Function | Single Side Stable |
| Must Operate (VDC) | 6.75 |
| Max. Continuous (VDC) | 13.5 |
| Coil Resistance +/- 10%(Ohms) | 579 |
| Life Expectancy Mechanical (Min Operations) | 1 x 10^8 at 3Hz |
| Life Expectancy Electrical (Min Operations) | 1 x 10^5 at 0.5A, 125VAC, Res. 1 x 10^5 at 2A, 30VDC, Res. |
| Operate Time (max.) | 3 ms at nominal coil voltage |
| Release Time (max.) | 3 ms at nominal coil voltage, (with no coil suppression) |
| Bounce (Typical) | At 10 mA contact current, 1 ms at operate or release |
| Capacitance | < 1 pF at 10 KHzopen contacts, < 1 pF at 10 KHzadjacent contact sets |
| Dielectric Strength (at sea level) | See Datasheet Table |
| Dropout | Greater than 10% of nominal coil voltage |
| Insulation Resistance | 1000 megohms min. at 25°C, 500 VDC, 50% RH |
| Ambient Temperature Operating | -40°C (-40°F) to 85°C (185°F) |
| Ambient Temperature Storage | -40°C (-40°F) to 115°C (239°F) |
| Vibration | Functional 1055 Hz 3.3mm DA, Destructive 10-55Hz 5.0mm DA |
| Shock | Functional, 735 m/s^2 Destructive, 980 m/s^2 |
| Max. Solder Temp. Temp./Time | 350°C (662°F) for 3 seconds, 260°C (500°F) for 10 seconds |
| Max. Solvent Temp. | 80°C (176°F) |
| Max. Immersion Time | 30 seconds |
| Enclosure | P.B.T. polyester |
| Terminals | Tinned copper alloy, P.C. |
| Weight | 0.8 grams |
| AZ8521 SUBMINIATURE SIGNAL RELAY |
| Series Description: |
- Conforms to IEC60950/EN41003 spacing and high break- down voltage
- Monostable and bistable (latching) coil versions available
- High dielectric and surge voltage: 2.5KV surge (per FCC Part 68) and meets Telcordia
- Low power consumption: 64mW pickup
- Stable contact resistance for low level signal switching
- Epoxy sealed for automatic wave soldering and cleaning
- UL , CUR E43203
|
Product Videos
Custom Field
