Product Description
| This product has been Discontinued |
Description: Signal Relay • Coil Voltage: 9 VDC • Contact Configuration: 2C DPDT Bifurcated • Current: 2 Amps • Mounting: PC Board • Operating Function: Single Side Stable
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 9 VDC |
| Contact Configuration | 2C DPDT (Bifurcated) |
| Current | 2 Amps |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Max. Continuous (VDC) | 20.1 |
| Coil Resistance +/- 10%(Ohms) | 579 |
| Must Operate (VDC) | 6.8 |
| Life Expectancy Mechanical (Min Operations) | 1 x 10^8 |
| Life Expectancy Electrical (Min Operations) | 5 x 10^5 at 1 A 30 VDC, Res., 2 x 10^5 at 0.5 A 125 VAC, Res. |
| Operate Time (max.) | 2 ms at nominal coil voltage |
| Release Time (max.) | 1 ms at nominal coil voltage, (with no coil suppression) |
| Bounce (typical) | At 10 mA contact current, 1 ms at operate or release |
| Set Time (Bistable Versions) | 2 ms at nominal coil voltage (typical) |
| Reset Time (Bistable Versions) | 2 ms at nominal coil voltage (typical) |
| Dropout | Greater than 10% of nominal coil voltage |
| Capacitance | Contact to contact: 0.5 pF, Contact set to contact set: 1.5 pF, Contact to coil: 1.0 pF |
| Dielectric Strength (at sea level) | 1000 Vrms between contact sets, 1000 Vrms across contacts, 1,250 Vrms contact to coil, Meets FCC part 68.302 1500 V lightning surge |
| Insulation Resistance | 1000 megohms min. at 25°C, 500 VDC, 50% RH |
| Ambient Temperature Operating | -40°C (-40°F) to 85°C (185°F) |
| Ambient Temperature Storage | -40°C (-40°F) to 105°C (221°F) |
| Vibration | .130" DA at 10-55 Hz |
| Shock | 50 g |
| Enclosure | LCP |
| Terminals | Tinned copper alloy, P.C. |
| Max. Solder Temp. | 260°C (500°F) |
| Max. Solder Time | 5 seconds |
| Max. Solvent Temp. | 80°C (176°F) |
| Max. Immersion Time | 30 seconds |