Product Description
Description: Signal Relay • Coil Voltage: 48 VDC • Contact Configuration: 2C DPDT (Bifurcated) • Current: 2 Amps • Mounting: PC Board • Operating Function: Single Side Stable
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Coil Voltage | 48 VDC |
| Contact Configuration | 2C DPDT (Bifurcated) |
| Current | 2 Amps |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Must Operate VDC | 36 |
| Max. Continuous (VDC) | 57.6 |
| Coil Resistance +/- 10%(Ohms) | 8533 |
| Life Expectancy Mechanical (Min Operations) | 1 x 10^8 at 3Hz |
| Life Expectancy Electrical (Min Operations) | 1 x 10^5 at 0.5 A, 125 VAC, Res., 2 x 10^5 at 2.0 A, 30 VDC, Res. |
| Operate Time (max.) | 4ms at nominal coil voltage |
| Release Time (max.) | 4ms at nominal coil voltage (with no coil suppression) |
| Dielectric Strength (at sea level for 1 min.) | See Datasheet |
| Dropout | Greater than 10% of nominal coil voltage |
| Insulation Resistance | 10^9 ohms min. at 25°C, 500 VDC, 50% RH |
| Ambient Temperature Operating | -40°C (-40°F) to 85°C (185°F) |
| Ambient Temperature Storage | -40°C (-40°F) to 115°C (239°F) |
| Vibration | Operational, 3.3mm DA, 1055 Hz Non-destructive, 5.5mm DA, 1055 Hz |
| Shock | Operational, 75 g min., 11ms Non-destructive, 100 g min., 11ms |
| Max. Solder Temp. Time | 260°C (500°F) for 5 seconds |
| Max. Solder Temp. | 80°C (176°F) |
| Max. Solder Time | 30 seconds |
| Max. Immersion Time | 30 seconds |
| Enclosure | P.B.T. polyester |
| Terminals | Tinned copper alloy, P.C. |
| Weight | 2 grams |
| AZ8462 MICROMINIATURE POLARIZED RELAY |
| Series Description: |
- SMT and DIP mounting available
- Microminiature size: up to 50% less board area than previous generation telecom relays
- High dielectric and surge voltage: 2.5KV surge (per Bellcore TANWT001089); "V" Version 6KV surge and 3KV dielectric strength, 1.5KV surge (per FCC Part 68), 1,000Vrms, open contacts
- Monostable and bistable (latching) versions available
- Low power consumption: 79mW pickup
- Stable contact resistance for low level signal switching
- Epoxy sealed for automatic wave soldering and cleaning
- UL, CUR file E43203
- All plastics meet UL94 V0, 30 min. oxygen index
|
