Product Description
Description: Signal Relay • Coil Voltage: 24 VDC • Contact Configuration: 2C DPDT • Current: 2 Amps • Mounting: PC Board • Operating Function: Single Side Stable • Type: Sensitive Coil
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Coil Voltage | 24 VDC |
| Contact Configuration | 2C DPDT |
| Current | 2 Amps |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Type | Sensitive Coil |
| Max. Continuous (VDC) | 48 |
| Coil Resistance +/- 10%(Ohms) | 2880 |
| Must Operate (VDC) | 18 |
| Life Expectancy Mechanical (Min Operations) | 1 x 10^7 |
| Life Expectancy Electrical (Min Operations) | 1 x 10^5 at 2.0 A 30 VDC Res. |
| Operate Time (max.) | 6 ms at nominal coil voltage |
| Release Time (max.) | 4 ms at nominal coil voltage (with no coil suppression) |
| Dielectric Strength (at sea level for 1 min.) | 1500 Vrms contact to coil, 1000 Vrms between open contacts, 1500 Vrms contact set to contact set |
| Insulation Resistance | 1000 megohms min. at 20°C, 500 VDC, 50% RH |
| Dropout | Greater than 10% of nominal coil voltage |
| Ambient Temperature Operating | -40°C (-40°F) to 70°C (158°F) standard, -40°C (-40°F) to 80°C (176°F) sensitive, -40°C (-40°F) to 85°C (185°F) ultra-sensitive |
| Ambient Temperature Storage | -40°C (-40°F) to 105°C (221°F) |
| Vibration | 1.5 mm DA at 10-55 Hz |
| Shock | 50 g 11 ms 1/2 sine |
| Enclosure | P.B.T. polyester |
| Terminals | Tinned copper alloy |
| Max. Solder Temp. | 270°C (518°F) |
| Max. Solder Time | 5 seconds |
| Max. Solvent Temp. | 80°C (176°F) |
| Max. Immersion Time | 30 seconds |
| Weight | 5 grams |
| AZ8222 SUBMINIATURE ULTRA-SENSITIVE DIP RELAY |
| Series Description: |
- Low profile for compact board spacing
- DC coils to 48VDC
- Bifurcated crossbar contacts
- Ultra-sensitivity, 84mW pickup
- Life expectancy to 100 million operations
- High switching capacity, 60W, 125VA
- Fits standard 16 pin IC socket
- Epoxy sealed for automatic wave soldering and cleaning
- Meets FCC Part 68.302 1500V lightning surge
- Meets FCC Part 68.304 1000V dielectric
|
