Product Description
Description: Power Relay • Coil Voltage: 5 VDC • Contact Configuration: 1A SPST-NO • Current: 50 Amps • Mounting: PC Board • Operating Function: Single Side Stable • Terminals: Wide contact gap > 1.85mm
| Product Information | Resources |
|
|
RoHS Compliant| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 5 VDC |
| Contact Configuration | 1A SPST-NO |
| Current | 50 Amps |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Terminals | Wide contact gap > 1.85mm |
| Must Operate (VDC) | 3.75 |
| Max. Continuous (VDC) | 10 |
| Coil Resistance +/- 10%(Ohms) | 50 |
| Life Expectancy Mechanical (Min Operations) | 1 x 10^6 |
| Life Expectancy Electrical (Min Operations) | 1 x 10^4 at 55A 250 VAC Res. |
| Operate Time (max.) | 40 ms at nominal coil voltage |
| Release Time (max.) | 5 ms at nominal coil voltage (with no coil suppression) |
| Dielectric Strength (at sea level) | 5000 Vrms coil to contact 2500 Vrms between contact sets 2500 Vrms between open contacts |
| Insulation Resistance | 1000 megohms min. at 20°C, 500 VDC 50% RH |
| Insulation (according to DIN VDE 0110, IEC 60664-1) | C250, Overvoltage category: III Pollution degree: 3 Nominal voltage: 250 VAC |
| Dropout | Greater than 5% of nominal coil voltage |
| Ambient Temperature Operating | At nominal coil voltage -40°C (-40°F) to 85°C (185°F) |
| Vibration | 0.062" (1.5 mm) DA at 10-55 Hz |
| Shock | 10g |
| Enclosure | P.B.T. polyester |
| Terminals | Tinned copper alloy, P.C. |
| Max. Solder Temp | 270°C (518°F) |
| Max. Solder Time | 5 seconds |
| Weight | 105 grams |
| Series Features |
| AZSR250 50A MINIATURE POWER RELAY |
| Series Description: |
|