Product Description
Description: Power Relay • Coil Voltage: 24 VD • Contact Configuration: 1A SPST-NO • Current: 200 Amps • Mounting: PC Board • Operating Function: Single Side Stable • Terminals: Contact gap : >3.2mm
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 24 VD |
| Contact Configuration | 1A SPST-NO |
| Current | 200 Amps |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Terminals | Contact gap : >3.2mm |
| Must Operate (VDC) | 18 |
| Max. Continuous (VDC) | 26.4 |
| Coil Resistance +/- 10%(Ohms) | 192 |
| Life Expectancy Mechanical (Min Operations) | 1000,000 cycles Min. |
| Life Expectancy Electrical (Min Operations) | See rated load |
| Operate Time (max.) | 40 ms Max. at nominal coil voltage(not include bounce time) |
| Release Time (max.) | 15 ms Max. at nominal coil voltage (with no coil suppression) |
| Dielectric Strength (at sea level) | 4000 Vrms(coil to contacts) 2000 Vrms(between open contacts) |
| Surge Voltage | 10KV @1.2/50?s (coil to contacts) 8150V @1.2/50?s(between open contacts) |
| Insulation Resistance | 1000 megohms min. at 20°C, 500 VDC 50% RH |
| Holding Voltage | Greater than 40% of nominal coil voltage |
| Dropout | Greater than 5% of nominal coil voltage |
| Ambient Temperature Operating | At rqated coil voltage-40°C(-40F )to 85°C(185°F) |
| Vibration | 1.5mm DA at 10-55 Hz |
| Shock | 10 g |
| Enclosure | P.B.T. polyester |
| Terminals | Tinned copper alloy, P.C. |
| Max. Solder Temp | 270°C (518°F) |
| Max. Solder Time | 5 seconds |
| Weight | 265 grams |
| Series Features |
| AZSR1200 200 AMP POWER RELAY |
| Series Description: |
|