Product Description
Description: Power Relay • Coil Voltage: 3 VDC • Contact Configuration: 1A SPST-NO • Current: 8 Amps • Mounting: PC Board • Operating Function: Single Side Stable • Sealed: Epoxy Sealed
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 3 VDC |
| Contact Configuration | 1A SPST-NO |
| Current | 8 Amps |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Sealed | Epoxy Sealed |
| Must Operate (VDC) | 2.4 |
| Max. Continuous (VDC) | 3.9 |
| Coil Resistance +/- 10%(Ohms) | 30 |
| Life Expectancy Mechanical (Min Operations) | 1 x 10^7 |
| Life Expectancy Electrical (Min Operations) | 3 x 10^4 at 8A, 250VAC resistive (SPST) |
| Operate Time (max.) | 5ms at nominal coil voltage |
| Release Time (max.) | 3 ms at nominal coil voltage, (with no coil suppression) |
| Set Time (typical) | 5ms at nominal coil voltage |
| Reset Time (typical) | 4ms at nominal coil voltage |
| Dielectric Strength (at sea level) | 3000Vrms contact to coil, 1000Vrms between open contacts, 2000Vrms between contact sets |
| Insulation Resistance | 1000 megohms min. at 20°C 500 Vdc 50% RH |
| Dropout | Greater than 10% of nominal coil voltage |
| Ambient Temperature Operating | -40°C (-40°F) to 85°C (185°F) |
| Ambient Temperature Storage | -40°C (-40°F) to 130°C (266°F) |
| Vibration | Functional 196m/s^2, Destructive 980m/s^2 |
| Shock | Functional 10Hz to 55Hz 2.0mm DA, Destructive 10Hz to 55Hz 3.5mm DA |
| Enclosure | P.B.T. polyester |
| Terminals | Tinned copper alloy, P.C. |
| Max. Solder Temp. | 270°C (518°F) |
| Max. Solder Time | 5 seconds |
| Max. Solvent Temp. | 80°C (176°F) |
| Max. Immersion Time | 30 seconds |
| Weight | 4.5 grams |
| Series Features |
| AZ888 8A SPST / 5A DPST POLARIZED SUBMINIATURE POWER RELAY SINGLE SIDE STABLE (NON-LATCHING) AND BISTABLE (LATCHING) |
| Series Description: |
|