Product Description
Description: Power Relay • Coil Voltage: 9 VDC • Contact Configuration: 1A SPST-NO • Current: 10 Amps • Mounting: PC Board • Operating Function: Single Side Stable • Sealed: Epoxy Sealed
| Product Information | | Resources |
Product Attribute
| Attribute Value
|
| Coil Voltage | 9 VDC |
| Contact Configuration | 1A SPST-NO |
| Current | 10 Amps |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Sealed | Epoxy Sealed |
| Must Operate (VDC) | 6.3 |
| Max. Continuous (VDC) | 13.5 |
| Coil Resistance +/- 10% (Ohms) | 360 |
| Life Expectancy Mechanical (Min Operations) | 10 million operations |
| Life Expectancy Electrical (Min Operations) | 1 x 10^5 at 8A, 250VAC res. |
| Operate Time (max.) | 7ms at nominal coil voltage |
| Release Time (max.) | 3ms at nominal coil voltage (with no coil suppression) |
| Dielectric Strength (at sea level for 1 min.) | 5000Vrms coil to contact; 2500Vrms between contact sets; 1000Vrms between open contacts |
| Insulation Resistance | 1000 megohms min. at 20°C, 500VDC, 50% RH |
| Dropout | Greater than 10% of nominal coil voltage |
| Ambient Temperature Operating | -40°C (-40°F) to 85°C (185°F) |
| Ambient Temperature Storage | -40°C (-40°F) to 155°C (221°F) |
| Vibration | Break Contact: 0.8mm DA 10 ...55 Hz; Make Contact: 1.65mm DA 10...55 Hz |
| Shock | NO: 10g NC: 5g |
| Enclosure | P.B.T. polyester, UL94 V-O |
| Terminals | Tinned copper alloy, P.C. |
| Max. Solder Temp. | 270°C (518°F) |
| Max. Solder Time | 5 seconds |
| Max. Solvent Temp. | 80°C (176°F) |
| Max. Immersion Time | 30 seconds |
| Weight | 8 grams |
| AZ6962 10 AMP SUBMINIATURE POWER RELAY |
| Series Description: |
- High sensitivity, 120mW pickup
- Dielectric strength 5000Vrms
- Isolation spacing greater than 10mm
- 10kV surge voltage
- Proof tracking index (PTI/CTI) 250
- Class F insulation system standard
- 10 Amp switching capability
- Epoxy sealed
- UL, CUR file E44211
- VDE file 40025524
|
