Product Description
Description: Power Relay • Coil Voltage: 6 VDC • Contact Configuration: 1A SPST-NO • Current: 40 Amps • Mounting: PC / QC Terminals • Operating Function: Single Side Stable • Contact Material: silver tin oxide (AgSnO2) • Coil Wire: Class B
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Coil Voltage | 6 VDC |
| Contact Configuration | 1A SPST-NO |
| Current | 40 Amps |
| Mounting | PC / QC Terminals |
| Operating Function | Single Side Stable |
| Contact Material | silver tin oxide (AgSnO2) |
| Coil Wire | Class B |
| Life Expectancy | Mechanical:1x107 Electrical: 1 x 105 at 30 A 125 VAC resistive (N.O.) |
| Operate Time (typical) | 8 ms (typ.), 15 ms (max.) at nominal coil voltage |
| Release Time (typical) | 3.5 ms (typ.), 10 ms (max.) at nominal coil voltage, w/o coil suppression |
| Dielectric Strength (at sea level for 1 min.) | coil to load contacts: 2500 Vrms open load contacts: 1500 Vrms |
| Insulation Resistance | 1000 M? (min.) at 20°C, 500 VDC, 50% RH |
| Temperature Range | Operating: -55°C (-67°F) to 85°C (185°F) - class B coil -55°C (-67°F) to 105°C (221°F) - class F coil |
| Vibration resistance | 0.062" (1.5 mm) DA at 1055 Hz |
| Shock | 10 g |
| Enclosure flammability | P.B.T. polyester UL94 V-0 |
| Terminals | Tinned copper alloy, P. C. on bottom with quick-connect tabs 0.250 on top for AZ2120 Note: Allow suitable slack on leads when wiring, do not subject the QC terminals to excessive force |
| Soldering | max. temperature: 270 °C (518°F) max. time: 5 s |
| Cleaning | max. Solvent Temp. : 80°C (176°F) max. Immersion Time: 30 seconds |
| Dimensions | length: 30.5 mm (1.20") width: 24.7 mm (0.97") height: 16.3 mm (0.64") or 25.9 mm (1.02") |
| Weight | 25 grams (approx.) |
| Compliance | UL 508, IEC 61810-1 |
| Series Features |
| AZ2110/AZ2120 MINIATURE POWER RELAY |
| Series Description: |
|