Product Description
|
| Product Information | Resources |
|
|
| Specifications |
| Product Attribute | Attribute Value |
| Mounting Type | Chassis Mount |
| Relay Type | Solid State Relay |
| Function | Repeat Cycle |
| Circuit | SPST-NO (1 Form A) |
| Delay Time | Fixed, 60 Sec |
| Contact Rating @ Voltage | 10A @ 120VAC/30VDC |
| Voltage - Supply | 120VAC |
| Termination Style | Screw Terminal |
| Timing Adjustment Method | Hand Dial |
| Timing Initiate Method | Input Voltage |
| Series Features |
| 304GX Solid-State Percentage Timer with Memory |
| Series Description: The 304GX operates like the 304G, only with cycle progress memory and a latching relay. The 304GX saves progress when power is removed, and will resume timing when power is reapplied. The relay only changes state when the cycle reaches the set point or the end of the cycle. |
| Series Operation: The 304GX comes standard in the 60 SEC range but is user configurable for the 15 SEC, 30 SEC, 120 SEC or MIN by jumpers from the PC board. Each of these ranges can also be made minutes range by a jumper. Its solid-state circuitry repeatedly closes the SPST load switch for a percentage of the time cycle, as set on the timer dial, and opens it for the remainder of the cycle. When the dial pointer is set below 1%, the load switch stays open for the full cycle; it remains closed when the pointer is set above 99%. This is true for all seconds and minutes. If power is interrupted, the 304GX timer will not reset and the relay state will not change. When power is restored, the timer will continue the interrupted cycles. |
|