Product Description
Description: Three Phase Current Unbalance and Over Current Monitor/Relay
Product Information | Resources |
|
|
Series Features |
CLB Series Three-Phase Current Unbalance and Over Current Monitor |
Series Description: The CLB Series Three-Phase Current Unbalance and Over Current Monitor from the ATC Diversified Electronics division of Marsh Bellofram is used to protect three phase equipment against CURRENT UNBALANCE and OVER CURRENT conditions. The control voltage is continuously applied to supply the sensing circuitry and the internal relay. When the current of any phase approximately 20% above the maximum operating current, the inrush delay begins. This delay disables the over current sensors while high inrush currents are present. Any time the currents are outside the preset limits after completion of the inrush delay, the internal relay will de-energize (Drop-out). A 2% differential (hysteresis) between Pick-up and Drop-out is incorporated to prevent chattering when operated in the automatic reset mode and the current is at the trip point. The reset mode is selected as follows:
|
|